Googel Chrome အေပၚမွာ ျမန္မာစာေပၚေအာင္လုပ္နည္း

                 မိမိ computer ထဲမွာ "Zawgyi-One" font ကုိ install လုပ္ထားေသာ္လည္း Googel Chrome ရဲ႕ တစ္ခ်ိဳ႕ေသာ website နဲ႔ blog စာမ်က္ႏွာေတြမွာ ျမန္မာစာမေပၚပဲ ေလးေထာင္႔အတုံးေလးေတြ ေပၚေနတာမ်ိဳးေတြ တစ္ခ်ိဳ႕လူေတြ ၾကံဳဖူးၾကမယ္ထင္ပါတယ္။ Googel Chrome အေပၚမွာ ျမန္မာစာေပၚေအာင္လုပ္နည္းကုိ ပုံႏွင္႔တကြေဖာ္ျပ ထားပါတယ္။ အရင္ဆုံး မိမိ Computer မွာ "Zawgyi-One" font ကုိ Install လုပ္ထားပါ။

Download For Zawgyi-One font  

Download for Zawgyi keyboard 

iOS 7.1, iOS 7.1.1 နဲ႔ iOS 7.1.2 တုိ႔အတြက္ အလြယ္ကူဆုံး Jailbreak လုပ္နည္း ႏွင္႔ Myanmar Font and Keyboard ထည့္နည္း

Pangu_v1.2.1 untethered jailbreak ကုိအသုံးျပဳ ျပီး iOS 7.1, iOS 7.1.1 နဲ႔ iOS 7.1.2 တုိ႔ကုိ Jailbreak လုပ္ႏု္ိင္ပါျပီ။

Jailbreak လုပ္နိုင္မဲ့ iOS Device ေတြကေတာ႔ …

• iPhone 5s, iPhone 5c, iPhone 5, iPhone 4S and iPhone 4
• iPad Air, iPad 4, iPad 3, iPad 2
• iPad mini, Retina iPad mini
• iPod touch 5G

အထူးသတိေပးခ်က္

• Jailbreak မျပဳလုပ္မီသင္႔ရဲ႕ iOS Device ရဲ႕ passcode ကုိ disable လုပ္ေပးပါ။ (Settings -> General -> Passcode Lock On -> Turn Passcode Off).
• iTunes (သုိ႔မဟုတ္) iCloud ကုိအသုံးျပဳ ျပီး iOS Deviceကုိ backup လုပ္ထားပါ။
• Tunes ကုိ latest version ျဖစ္ေအာင္ update လုပ္ထားပါ။

• (Please note that jailbreaking your iOS device may void your warranty and hence proceed with caution and at your own risk.)

How to Root Galaxy S4 (LTE+) I9506 on Android 4.3 Jelly Bean and install Myanmar Zawgyi font

This method completely supports Samsung Galaxy S4 with LTE+ (GT-I9506).

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!


Pre-Requisites
1. Install USB Drivers for Samsung Galaxy S4 on your computer. 
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S4 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The CWM recovery works only on the LTE+ version of Samsung Galaxy S4 (GT-I9506). Applying this on any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by selecting Settings >> About Phone.

Samsung Galaxy Note 2 LTE GT-N7105 Android 4.3 Root and Myanmar Zawgyi font install

Pre-requisites
1. Install USB Drivers for Galaxy Note 2 on the computer.
2. Enable USB Debugging Mode on the phone. Go to Settings >>More>> About Device. Tap on "Build Number" several times till the message shows "You are now a Developer". Then enable USB debugging by navigating to Settings >>More>> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 %.

 Samsung Galaxy Note 2 Android 4.3 Root 

1.    Download CF-Auto-Root for Galaxy Note 2 N7105 and extract the Zip file: CF-Auto-Root-t0lte-t0ltexx-gtn7105.zip

2.    Download Odin 3.09 and extract the Zip file: Odin3_V3.09.Zip

3.    Now, Switch off your phone and boot Galaxy Note 2 N7105 into Download Mode by pressing and holding the Volume Down+Home+Power buttons together (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.

4.    Run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)

5. Now connect your Galaxy Note 2 N7105 to your computer via USB cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
8. Now, click on the PDA button and select the CF-Auto-Root-t0lte-t0ltexx-gtn7105.tar.md5 file.
9. Finally, click on the Start button to begin the rooting process, wait few moments.
10. Once completed, you would see “PASS!” message in ID:COM port having green background
11. Your phone should automatically reboot after completion
12. You can now disconnect your phone from computer
13.  If you see message Error “SuperSU” , go to play Store>> update SuperSu.
14. To verify your device is rooted or not, you can download and run the Root Checker App from Google Play Store.
15. Finish

Myanmar Zawgyi font install

1)    Connect your phone to PC by using USB cable.

2)    Download smartzawgyi4.3advanced

3)    Right click on "smartzawgyi4.3advanced" and Extract it.

4)    Right click on “Installer” and Run as administrator.

5)    If you see a message Super User Request on your phone, click on  “Grant”

6)    Your phone will Auto Reboot.

7)    After reboot your phone, you can see Myanmar font on your phone.

 Warning: Before install Myanmar Zawgyi font, Make sure your Window system is 32 bit.

iPhone version iOS 6.0. to 6.1.2 ရွိျပီးသားသူေတြ အတြက္ အလြယ္ကူဆုံး jailbreak လုပ္နည္း

In this tutorial, I will take you through the step by step procedure to jailbreak your iOS device running iOS 6, iOS 6.0.1, iOS 6.0.2, iOS 6.1, iOS 6.1.1 and iOS 6.1.2  with evasi0n.

Here are some important points to note before you proceed.

iPhone version iOS 5.1.1 ရွိျပီးသားသူေတြ အတြက္ အလြယ္ကူဆုံး jailbreak လုပ္နည္း

• Jailbreak with Redsn0w 0.9.14 beta 2

Here are some important points to note before you proceed.

• RedSn0w 0.9.14 beta 2 supports untethered jailbreak.
• RedSn0w 0.9.14 beta 2 supports iPhone 4S, iPhone 4, iPhone 3GS running on iOS 5.1.1.
• Please note that jailbreaking your iPhone may void your warranty and hence proceed with caution and at your own risk.
• Please do not forget to backup your iPhone before you proceed.
• Please disable the passcode of your iOS device (Settings -> General -> Passcode Lock On -> Turn Passcode Off).